Siemens SINUMERIK 840Di sl - Page 97

Positional Data
3.5 Special turning functions
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
97
=
;
'
:
'
0
/RQJLWXGLQDOD[LV
7UDQVYHUVHD[LV
Parameters
G54 to G599 or TRANS
Call for the position of the workpiece zero
M
Machine zero
W
Tool zero point
Z axis
Longitudinal axis
X axis
Transverse axis
The two mutually perpendicular geometry axes are usually designated as follows:
• Longitudinal axis= Z axis (abscissa)
• Transverse axis= X axis (ordinate)