Siemens SINUMERIK 880 GA2 Programming Guide

13 Program Key SINUMERIK 880/880 GA2 01.93
13.2 Overview of G commands for SINUMERIK 880/880 GA2
G202 Deselect synchronous spindle
G203 Select C axis operation, clockwise (SINUMERIK 880 GA2 only)
G204 Select C axis operation, counter-clockwise (SINUMERIK 880 GA2 only)
G205 Change from C axis operation to spindle operation (SINUMERIK 880 GA2 only)
G230 Deselect transformationTRANSMIT or
deselect transformation coordinate rotation 2D/3D
G231 Transformation TRANSMIT
G233 Transformation coordinate rotation 2D
G235 Transformation coordinate rotation 3D
G247 Approach contour in quadrant
G248 Exit contour in quadrant
G330 Deselect transformation TRANSMIT or
deselect transformation coordinate rotation 2D/3D
G331 Transformation TRANSMIT
G333 Transformation coordinate rotation 2D
G335 Transformation coordinate rotation 3D
G347 Approach contour in semi-circle
G348 Exit contour in semi-circle
13–4
© Siemens AG 1991 All Rights Reserved 6ZB5 410-0HD02
SINUMERIK 880, (PG)

Siemens SINUMERIK 880 GA2 Specifications

General

Brand	Siemens
Model	SINUMERIK 880 GA2
Category	Control Unit
Language	English