Procedure
1. Remove the lid from the positioner by unscrewing the 4 screws.
2. Remove the cable gland.
In the following, the cable gland is shown in blue as an example.
The tightening torques of the cable glands dier depending on the type. You can nd the
tightening torques in the Technical specications (Page61)section
3. Assemble the adapter (C) and the cable gland as follows:
Bluetooth
B.1Connecting SIPART PS100 with SITRANS AW050 Bluetooth adapter
SIPART PS100
72 Operating Instructions, 06/2023, A5E50188938-AF
To Next Page
Loading...
Need help?
General
