Siemens siprotec 7SA522 User Manual

Configuration
5-317SA522 Manual
C53000-G1176-C119-2
Cyclical Restora-
tion
Here, the user may specify the source of the cyclical trigger for the transfer. Also, the
user may set the time interval and determine whether the metered value buffer should
be deleted after transfer to the SIPROTEC
®
-device has taken place.
Figure 5-27 Dialog Box to Restore Metered Values and Program Cyclical Restoration
In the current version of DIGSI
®
4, triggering occurs based on the programmed
Absolute time.

Siemens siprotec 7SA522 Specifications

General

Brand	Siemens
Model	siprotec 7SA522
Category	Protection Device
Language	English