Siemens siprotec 7SA522 - General Device Settings

SIPROTEC
®
4 Devices
4-297SA522 Manual
C53000-G1176-C119-2
4.12 General Device Settings
The settings of the display to show information of network faults on the LEDs and the
LCD on the front of the SIPROTEC
®
4 device are defined in the DIGSI
®
4 window
shown in Figure 4-25.
k4123.gif
Figure 4-25 DIGSI
®
4, general device settings (targets) — example
The setting can also be changed at any time using the operator control panel on the
SIPROTEC
®
4 device: 0DLQ0HQX → 6HWWLQJV → 'HYLFH.