7-17SA522 Manual
C53000-G1176-C119-2
Control During Operation 7
This chapter describes interaction possibilities with the SIPROTEC
®
7SA522 device
during operation. The information that can be obtained and the procedure for retriev-
ing the data are discussed. Methods of influencing the device functions during opera-
tion and controlling the system using the device are covered.
Detailed knowledge about the device functions is not required at this point. However,
the configuration of the device covered in Chapter 5 — especially configuration of the
input and output functions — is assumed to have already taken place.
Please note that the examples shown are general and may differ in wording or details
from the device at hand. Also, depending on the model variant, some of the functions
discussed below may not be available.
7.1 Read-out of Information 7-2
7.2 Control of Device Functions 7-22
7.3 Circuit Breaker Test Function 7-32
7.4 Control of Switchgear 7-36
To Next Page
Loading...
Need help?
General
