Siemens siprotec 7SA522 - Page 436

Control During Operation
7-28 7SA522 Manual
C53000-G1176-C119-2
Figure 7-31 Switching setting groups from the front panel
Control of the setting groups can always be regained by switching to one of the groups
A through D.
The key can be used to return to the 6(77,1*6 sub-menu; the key can be
pressed to returns to the 0$,10(18.
From PC with By opening the 2QOLQH directory with a double click in , the operating functions for the
device appear in the left part of the window. See Figure 7-32.
Figure 7-32 Function selection window in – example
Double click on 6HWWLQJV to find &KDQJH*URXSLQWKHGDWDZLQGRZ(Figure
7-32 right).
&+$1*(*5283

$&7,9(*5283
*URXS$
The currently-active setting group is dis-
played under Address .
The setting group can be changed under Ad-
dress : by pressing the key, after
entering the password, two possible alterna-
tives are displayed in a new window each
time:
Using the keys, select one of the alter-
natives and confirm with the key;
The next question (“$UH\RXVXUH"”) is
answered with <HV and the selected alterna-
tive is confirmed, or is answered with 1R using
the key and the change is cancelled with
the key.
ENTER
ENTER
ENTER
$UH\RXVXUH"
<HV1R
ENTER
&+$1*(WR
!*URXS$
!*URXS$
*URXS%
*URXS&
*URXS'
YLD%LQDU\,QSXW
YLD3URWRFRO
MENU
: