Siemens SIPROTEC 7SS523 V3.2

Control During Operation
212
7SS52 V4 Manual
C53000-G1176-C182-1
6.2.1.5 Spontaneous Annunciation
You can use “Spontaneous Annunciations” to view the log file of incoming current an-
nunciations.
from the PC
with DIGSI
To read out spontaneous annunciations of the central unit (PC linked to central unit)
proceed as follows:
 Click Spontaneous annunciation. The right section of the window shows date and
time of each spontaneous annunciation.
 Double-click an entry in the right section of the window. The Spontaneous annun-
ciation window opens. Each new incoming annunciation will appear immediately,
i.e. the user does no have to wait for or trigger an update.
To read out spontaneous annunciations of a single bay unit (PC linked to central unit
or bay unit) proceed as follows:
 Open the corresponding bay unit in the DIGSI Manager.
 Open the Select annunciations window.
 Double-click Spontaneous annunciation. The Spontaneous annunciation window
appears.
6.2.1.6 Statistics
from the PC
with DIGSI
To read out statistics annunciations of a single bay unit (PC linked to central unit or
bay unit) proceed as follows:
 Open the corresponding bay unit in the DIGSI Manager.
 Open the Select annunciation window.
 Double-click Statistic. The corresponding contents of the statistics is displayed on
another window.
Note
You need DIGSI to read out the spontaneous annunciations.

Note
Statistics annunciations are only available for the bay units.
