Device
163
7SS52 V4 Manual
C53000-G1176-C182-1
UnlockDT The interlocking of this flag with binary input ”>Data Stop” (FNo. 16/CU) is gener-
ated via CFC. The flag UnlockDT (Unlock data transmission via BI) has the following
meaning: A data transmission stop which has been initiated via binary input may only
be reset again by binary input.
Relevant information: On/Off
5.7.3 List of Information from the Central Unit
FNo. Alarm Comments
16 >DataStop >Stop data transmission
To Next Page
Loading...
