Siemens SIRIUS 3RW52 - Page 150

Functions
8.11 Standard 3RW5 HMI
SIRIUS 3RW52 Soft Starter
150 Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
Navigating and setting
The keys are used for navigation, for selecting and setting menu items and for executing
predefined actions.
Key
Actions
x Jump to next menu item
x Set digit
x Jump to previous menu item
x Set digit
x Identical to RESET key on 3RW52 soft starter
x Motor stops as parameterized if the 3RW5 HMI Standard is the master control.
x Motor starts as parameterized if the 3RW5 HMI Standard is the master control.
x Changes master control
LOCL
means that the 3RW5 HMI Standard is the master control.
REMT means that the 3RW5 HMI Standard is not the master control.
x Locking switch Locked / Unlocked:
To be able to operate the 3RW52 soft starter with the 3RW5 HMI Standard, the locking
switch on the rear of the 3RW5 HMI Standard must be unlocked. If the locking switch on
the rear of the 3RW5 HMI Standard is in the "Locked" switch position, the
"RESET / TEST", "LOCL/REMT" and "Start" and "Stop" keys are disabled. Navigation
through the menu using the navigation keys, however, is still possible.