Siemens SIRIUS 3RW52 - Removing Standard 3 RW5 HMI

Mounting and dismantling
4.4 Installing, mounting and removing the 3RW5 HMI
SIRIUS 3RW52 Soft Starter
60 Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
4.4.2 Removing Standard 3RW5 HMI
Requirements
Installed 3RW5 HMI Standard (accessory) (Page 58).
Procedure
Illustration similar
Ⴠ Pull the 3RW5 HMI Standard far enough out of the 3RW52 soft starter ཰ to gain access
to the HMI connecting cable.
Ⴠ Unfasten the retaining elements of the HMI connecting cable
ཱ and pull the HMI
connecting cable out of the 3RW52 soft starter
ི.
Result
You have removed the 3RW5 HMI Standard. You can install the 3RW5 Standard on a
surface (Page 71) or in a cabinet door (Page 63) or you can install a
new 3RW5 HMI Standard (Page 58).