Siemens SIRIUS 3RW52 - Micro SD Card

Functions
8.12 High Feature 3RW5 HMI
SIRIUS 3RW52 Soft Starter
166 Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
8.12.4 Micro SD card
Requirements
Ⴠ 3RW5 HMI High Feature (accessory)
Menu: "Micro SD card"
The "micro SD Card" menu appears after you have inserted a micro SD card into the
3RW5 HMI High Feature.
Ⴠ Access protection to the 3RW5 HMI High Feature is not active or has been reset.
Ⴠ Inserted micro SD card, e.g. micro SDHC Class 10
– File format: FAT32
– Capacity: max. 32 GB
Operating principle
Together with a micro SD card, the 3RW5 HMI High Feature can perform firmware updates,
exchange configuration files and service data, and store logbooks.
Parameters
Action
Description
Load communication and HMI parameters to
soft starter
The parameters of the 3RW5 HMI High Feature are transferred from the
micro SD card to the 3RW52 soft starter. The following data is transferred:
x Device parameters of the 3RW5 HMI High Feature
Application: Parameterize 3RW5 HMI High Feature serially / identically
(Page 126)
Load communication and HMI parameters to
micro SD card
The parameters of the communication and the 3RW5 HMI High Feature
are transferred from the 3RW52 soft starter to the micro SD card. The
data is saved in an automatically generated folder
(e.g. "1P3RW5 xxx-xxxxx"). The following data is transferred:
x I&M 1 data (Page 160)
x I&M 3 data (Page 160)
x Device parameters of the 3RW5 HMI High Feature
x Communication parameters
Applications:
Parameterize 3RW5 HMI High Feature serially / identically (Page 126)
"Device change" function (Page 204)