Siemens SIRIUS 3RW52 - 4 Mounting and Dismantling; Installing the 3 RW52 Soft Starter

SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
53
Mounting and dismantling
4
4.1 Installing the 3RW52 soft starter
Procedure
1. Optionally mount the fan cover (Page 54).
2. Mount the 3RW52 soft starter on a level surface (Page 56).
3. Ensure that the permissible temperature range and the necessary clearances are
complied with.
Technical data in Siemens Industry Online Support (Page 207)
4. Optionally install the 3RW5 HMI Standard (accessory) or 3RW5 HMI High Feature
(accessory).
– Installing the Standard 3RW5 HMI in 3RW52 soft starter (Page 58)
– Installing the High Feature 3RW5 HMI in the 3RW52 soft starter (Page 61)
– Installing the Standard 3RW5 HMI into the control cabinet door (Page 63)
– Installing the High Feature 3RW5 HMI in the control cabinet door (Page 67)
– Installing the Standard 3RW5 HMI on a flat surface (Page 71)
– Installing the High Feature 3RW5 HMI on a flat surface (Page 73)
5. Optionally install the 3RW5 communication module (accessory).
You will find further information in the manual for the 3RW5 communication module in
question.
Result
You have mounted the 3RW52 soft starter and can now connect it.