Siemens SIRIUS 3RW52 - Device Change Function

Maintenance and servicing
10.5 "Device change" function
SIRIUS 3RW52 Soft Starter
204 Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
10.5 "Device change" function
WARNING
Hazardous voltage.
Can cause death or serious injury.
The present device/part conducts hazardous voltages.
Touching live components will result in death or severe injury.
Installation, commissioning, and maintenance only by qualified specialist personnel.
The device replacement is only permissible by qualified personnel.
Operating principle
If the 3RW5 soft starter, the 3RW5 HMI High Feature (accessory) or the
3RW5 communication module (accessory) has to be replaced because of a fault, you can
transfer data to your new device (identical type) using the "Device change" function or
SIRIUS Soft Starter ES (TIA Portal). To be able to transfer data, you must first save it.
The following data are transferred with the "Device change" function:
Ⴠ I&M 1 data
Ⴠ I&M 3 data
Ⴠ Device parameters of the 3RW5 HMI High Feature
Ⴠ Communication parameters
Transmission options
Ⴠ Device change with micro SD card on the 3RW5 HMI High Feature (Page 205)
Ⴠ Device change with SIRIUS Soft Starter ES (TIA Portal) (Page 206)