Mounting and dismantling
4.3 Mounting the 3RW52 soft starter on a level surface
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
57
Procedure
Device can cause injury if it is dropped.
Always ask a second person to help you transport, install and remove a heavy device. Use
suitable lifting equipment and wear personnel protective equipment.
Ⴠ Screw the lower 2 screws into the mounting plate . Ensure that both screws of at
least 1.5 cm (at least 2 cm for size 4) are protruding and then place the
3RW52 soft starter onto the 2 lowermost screws
ཱ from above.
Ⴠ Tilt the 3RW52 soft starter up so that it is resting level against the mounting plate
ི and
tighten all 4 screws with the specified torque
ཱི.
Result
You have mounted the 3RW52 soft starter on a level surface and can now connect
(Page 81) it.
To Next Page
Loading...
