Description of SISTORE MX / MX DVD
17
Siemens Building Technologies
Fire Safety & Security Products 02.2009
EN
6.2 Connections on the back of the device
6.2.1 SISTORE MX 3204
1
2
34
5678
910
Fig. 2 Back side of SISTORE MX 3204
1 Fan
2 Video output 2 video outputs, 50 Hz/60 Hz
Connect the same type of unit here as that on the video inputs (PAL, for
example), since otherwise it is not possible to operate the video outputs.
3 ON / OFF Switching the unit on and off
4 Video input 16 video connection jacks
Depending on the model and licence file, up to 32 cameras can be
connected.
5 Power supply 100 – 230 V AC, 50 – 60 Hz, 120 W (use only the power supply provided)
6 LAN/USB LAN: connection of a LAN cable (RJ45 network cable)
USB: Connection of 2 USB-enabled devices
(e.g. USB-ISDN modem, printer, mouse, keyboard, DVD burner)
Please note: The operation of external USB hard drives as a memory
expansion is not allowed for technical reasons.
7 COM 1/COM 2
RS485
Connection for control of pan/tilt cameras, CKA48xx control panel or MX
multichannel box
8 VGA For connecting a monitor, e.g. CTMC 15/17/19
9 L-out Connection of commercially available speakers or headphones
10 L-in Connection of audio sources
11 MIC Connection of a microphone for voice recording
(such as a standard microphone sold as a commercial PC accessory)
12 SCSI For connection of SCSI RAID system, e.g. SISTORE RAID
Connection: HD68
Standard: Ultra Wide SCSI, Single End Mode
13 Digital I/O input Trigger inputs 1 … 16
14 Digital I/O output Digital outputs 1 … 8
15 Digital I/O control Digital inputs 1 ... 4
Pin assignment
RS-485 socket RS-485 socket
PIN 1: NC PIN 6: NC
PIN 2: A (TX+/RX+) PIN 7: NC
PIN 3: B (TX-/RX-) PIN 8: NC
PIN 4: NC PIN 9: NC
PIN 5: GND
To Next Page
Loading...
Need help?
General
