Software (SISTORE unit)
53
Siemens Building Technologies
Fire Safety & Security Products 02.2009
EN
The SISTORE unit is delivered without keyboard. Entry of the characters of the
password and parameter setting can be made using the virtual keyboard.
Alternatively, a USB keyboard is available as an option. See Section
191H4 192HDetails for ordering193H.
1. Connect the mouse supplied to a USB port.
2. Switch the device on.
Î The SISTORE MX application software will be started automatically.
3. Click the Login icon
.
Î The virtual keyboard will appear.
4. Enter the password by clicking the appropriate letters and characters on the
virtual keyboard.
5. Click OK.
Î The system is now ready for operation.
Entries into all other input fields of the system are made in the same manner.
9.2 Updating or repairing software
You may have to reinstall or repair the SISTORE MX application software on a
SISTORE unit or on a client PC in case components of the software are damaged.
In that case proceed as follows:
1. Place the installation CD in the CD drive.
2. Launch SISTORE_MX_280.exe.
Î The following dialog box opens.
To Next Page
Loading...
Need help?
General
