Siemens SISTORE MX User Manual

SISTORE MX RemoteView
107
Siemens Building Technologies
Fire Safety & Security Products 01.2008
19.8.2 Starting and terminating the virtual guard
Starting the virtual guard
Prerequisites:
z There is at least one entry in the address book and the cameras to be displayed
have been selected.
There are several possibilities to start the virtual guard:
z Click the button in the toolbar.
– Or –
z Choose the menu option Admin -> Start virtual guard.
– Or –
z Enter the following command in the command line:
C:\Program Files\Siemens\SISTORE MX\REMOTEVIEW\
SistoreRemoteView.exe -vguard
NOTE:
While the virtual guard is running in SISTORE MX RemoteView, it is not possible to establish a
connection to the RemoteView client if an alarm occurs.
Terminating the virtual guard
There are two possible ways to terminate the virtual guard:
1. Click the button
in the toolbar.
– Or –
1. Select the Administration menu in the menu bar.
2. Select the menu option End virtual guard.
Logging on to the server
A log-in on the server takes place automatically. The user rights for this automatic
log-in, however, are very restricted. Replay and configuration are not possible.
If you wish to reach further rights:
1. Click the Login
button.
Î The SISTORE MX RemoteView Login dialog box is opened.
2. Enter a user name in the User name field.
3. Enter the appropriate password in the Password field.
NOTE:
The virtual guard is interrupted, i.e. during any such action by the user there is no automatic
disconnection and reconnection of the connection.
A connection duration in seconds can be set for each connection. In addition, a list of cameras can be
stipulated which are to be shown live after the connection has been set up.

Siemens SISTORE MX Specifications

General

Brand	Siemens
Model	SISTORE MX
Category	DVR
Language	English