Safety
8
Siemens Building Technologies
Fire Safety & Security Products 01.2008
2 Safety
2.1 Target readers
The instructions in this document are designed only for the following target
readers:
Reader group Qualification Activity Condition of the
product
Operator Has read and understood
the instructions in the
documentation regarding
operation. No particular
basic training is required,
although some instruction
by technical specialists may
be necessary.
Performs only the
procedures for proper
operation of the product,
device or system.
The product is installed
and set up.
Service personnel Technical training for
building or electrical
installations.
Checks the product at
regular intervals to
ensure that it is in good
working order, services
the product and repairs it.
Product already in use
and requiring servicing.
2.2 Work safety information
– Read the general safety precautions before operating the device.
– Follow all warnings and instructions marked on the device.
– Keep this document for reference.
– Always pass this document on together with the product.
Burn hazard
– Do not touch the housing of the device while it is in operation.
National standards
The products are developed and manufactured according to all applicable
European safety standards. Any national or local safety standards or laws that
apply to the development, design, installation, operation or disposal of a product
must be adhered to in addition to the instructions in the product documentation.
Electrical systems
DANGER
Work on electrical systems should only be performed by trained personnel
under the supervision of a certified electrician in accordance with the
appropriate regulations.
To Next Page
Loading...
Need help?
General
