SISTORE MX RemoteView
115
Siemens Building Technologies
Fire Safety & Security Products 01.2008
NOTE:
If SISTORE MX is not configured to begin immediately after a restart with the recording, no recording
will take place after reboot.
However, the recording can be started via remote control at any time.
19.17.1 Configuring the video display area
Select the desired video display mode in the View menu.
Fig. 66 SISTORE Remote View – "View" menu
Auto. matrix The display area is split automatically.
1 – 64 cameras Up to 64 cameras can be selected to be viewed
simultaneously, depending on the number of
cameras configured.
Event view The event window is opened.
Map The site plan is opened.
Less cameras The number of camera pictures displayed is
reduced.
More cameras The number of camera pictures displayed is
increased.
Full screen The video display area switches to full-screen
mode.
Statusbar visible Displays the status bar.
System information visible Displays system information.
To Next Page
Loading...
Need help?
General
