Display mode functions
38
Siemens Building Technologies
Fire Safety & Security Products 01.2008
Disconnect RemoteView clients
1. To do this select Connect state… in the Action menu.
2. Double click an active connection.
10.7 Show cash data
Prerequisites:
z The SISTORE MX application software has been started.
z You are logged into SISTORE MX..
(See Section
9.2: Login)
z The SISTORE MX application software is in display mode.
z SISTORE MX is in cash box mode.
Further information on this can be found in the SISTORE MX Configuration
Manual.
z At least one cash box has been added to the cash box list and configured.
Further information on this can be found in the SISTORE MX Configuration
Manual.
1. Select the option
Show cashdata in the Action menu.
Î The SISTORE MX cash box data dialog opens (see Fig. 17).
2. In the
Options group field under Cash, select either all cash boxes or select
the desired cash box.
3. In the
Options group field under Data, select either Raw, Codepage or
Filtered.
Î The cash box data will be shown.
Fig. 17 SISTORE MX cash box data dialog
NOTE
Changes to the filter settings will be seen with the next data received.
To Next Page
Loading...
Need help?
General
