Siemens SISTORE MX User Manual

External devices
58
Siemens Building Technologies
Fire Safety & Security Products 01.2008
Description of the function keys
Key / Key sequence
On SISTORE MX this key has no
function.
F1
Switch on the monitor cycle on monitor
output 1
F2
Switch on the monitor cycle on monitor
output 2
F3
Switch on the monitor cycle on monitor
output 3
F4
Switch on the monitor cycle on monitor
output 4
F5
Description of camera control
Key / Key sequence
Panning and zooming of Dome
cameras and
pan-and-tilt drives
Joystick
Zoom out
Press key or turn joystick left
Zoom in
Press key
or turn joystick right
Focus near Press "0"
Focus far
Press
NOTE:
As an entry can consist of several keys in this group, a preset period of time (time-out parameter is
supplied by SISTORE MX) is waited after every key is pressed before the entry is considered to be
completed. Only one and two-digit figures are accepted.
Please see the operating instructions for the CKA4810/CKA4820 for further information.
Operation without CKA
If your system operates temporarily without CKA:
1. Click on the icon
in the Windows task bar.
2. Disable the driver in the context menu.
If your system operates permanently without CKA:
1. Select Start > Run.
2. Enter msconfig.

Siemens SISTORE MX Specifications

General

Brand	Siemens
Model	SISTORE MX
Category	DVR
Language	English