Fault diagnosis
2015-09-07 / DIS 113_58300000171499_ara_en_c Copyright by BSH Hausgeräte GmbH Page 28 of 65
Fault Possible cause Troubleshooting
Laundry bunched up (laundry roller) Not loaded properly ► Advise customer:
- Close zips, mix up small and large items, pay attention to size of load. See
instruction manual.
No error
See instruction manual
- Condensate is needed for the self-cleaning function
► Customer advice
Condensate in collector despite connected
drain set
Direct discharge
On appliances without Refresher function,
nipple on container removed
► To check whether nipple has been removed, see instruction manual.
Clean filter/lint strainer flashes/lights up at
end of programme
Not a fault. ► Clean filter/lint strainer
- The customer is informed that the filter needs to be cleaned by the flashing/light
at the end of the programme. This display is cancelled by opening and closing the
door.
To Next Page
Loading...
