Siemens WT46W430FF - Removing;Installing the Power Module

Repairs
2015-09-07 / DIS 113_58300000171499_ara_en_c Copyright by BSH Hausgeräte GmbH Page 44 of 65
6.7 Removing/installing the power module
Prerequisite:
• Worktop has been removed.
6.7.1 Removing the power module
Graphic 16:Module is installed
1 Conductor connection 3 Power module
2 Cover
Graphic 17:Position of power module
4 Catch elements
.
2. Remove conductor (1).
3. Pull cables out of the cable holders on the power module (3) and on the plastic
crossmember (2).
4. Disconnect electrical connections.
5. Disengage upper catch elements (4).
6. Push power module upwards and disengage lower catch elements.
7. Remove power module from the appliance.