Repairs
2015-09-07 / DIS 113_58300000171499_ara_en_c Copyright by BSH Hausgeräte GmbH Page 34 of 65
6.1 Installing the appliance
The appliance can be installed in combination with a washing
machine (front loader).
To ensure a secure connection, use the original connection sets
(see operating instructions).
A direct water outlet is available as an option.
If the fresh air supply is unsatisfactory, the degree of efficiency of
the dryer drops significantly.
Prerequisite:
• Installation location is not susceptible to frost. The ambient temperature is
between 5 °C and 35 °C.
• Installation location is supplied with adequate fresh air.
1. Place the appliance on a level and firm surface.
2.
3. Align appliance horizontally by turning the height-adjustable feet.
.
Height-adjustable feet must not be removed and may be
unscrewed by a maximum 18 mm.
During transportation height-adjustable feet must be screwed
in all the way.
Risk of breakage
5. Check horizontal alignment of the appliance using a spirit level.
6. Check that the cooling-air grille on the front of the appliance is not blocked to
ensure that adequate cooling air can be drawn in.
To Next Page
Loading...
