Siemens WT46W430FF - Remove;Install Electrodes for Conductivity Measurement

Repairs
2015-09-07 / DIS 113_58300000171499_ara_en_c Copyright by BSH Hausgeräte GmbH Page 48 of 65
6.10 Remove/install electrodes for conductivity
measurement
Prerequisite:
• Worktop has been removed.
• Control panel has been removed.
• Door has been removed.
• Front panel has been removed.
6.10.1 Remove electrodes for conductivity measurement
1. Remove lint filter.
2. Remove screws (1) inside drum.