Fault diagnosis
2015-09-07 / DIS 113_58300000171499_ara_en_c Copyright by BSH Hausgeräte GmbH Page 32 of 65
4.5 Leaks
Fault Possible cause Troubleshooting
Condensate dripping between panel and
display
Leak between bearing plate and cover ► Check seal[ 00635382] for correct seating
► Replace seal[ 00635382]
Leakage bottom front left Foam mat not in correct position ► Foam mat [ 12007650] Place foam mat so that it is in contact with the left housing
corner.