Repairs
2015-09-07 / DIS 113_58300000171499_ara_en_c Copyright by BSH Hausgeräte GmbH Page 53 of 65
6.13 Clean the filters
Prerequisite:
• Lint filter has been removed.
1.
2.
Further information can be found in the following document:
• Video "Cleaning lint filter (AVC) - cleaning lint filter heat
pump dryer "
Clean lint filter with warm water.
3.
.
If the appliance has not been used for some time, clean the
filter in the condensate container without fail.
5. Remove filter in condensate container after two drying programmes.
6. Rinse filter with warm water.
.
Never operate the appliance without the lint filter or
condensate container filter.
To Next Page
Loading...
