EasyManua.ls Logo

Siemens WT46W430FF - Transporting the Appliance

Siemens WT46W430FF
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Repairs
2015-09-07 / DIS 113_58300000171499_ara_en_c Copyright by BSH Hausgeräte GmbH Page 35 of 65
6.2 Transporting the appliance
Condensation may run out of the overflow opening at the rear left
side or out of the pump chamber during transportation.
The appliance can be transported at temperatures of −40 °C to
+70 °C if there is no water present in the bottom group.
.
During the draining process, there is always a little water left in
the appliance:
Remaining water after a normal drying cycle: approx.
450 ml
2. If possible, transport appliance upright, e.g. using a hand cart.
3. Leave the appliance to rest for approximately 2 hours after transport before
switching it on.

Table of Contents

Related product manuals