Repairs
2015-09-07 / DIS 113_58300000171499_ara_en_c Copyright by BSH Hausgeräte GmbH Page 65 of 65
6.24 Installing maintenance door
There is a video sequence available in the Quick Finder for this maintenance step.
Prerequisite:
• Air inlet panel has been removed.
• Maintenance cover in bottom group has been removed.
1. Attach maintenance door ([ 646776] ) at the specified points.
2. After installation, check for leaks.
3. Fill condensate container with clean water.
4. Start customer test programme P15.
To Previous Page
Loading...
