Sierra Wireless FX30 - Page 72

Sierra Wireless FX30 User Guide
Rev 4 March 2019 72 41110030
AT!FWD?FACTORYRECOVERY
Queries the current status of the
factory default recovery mechanism
To query:
AT!FWD?FACTORYRECOVERY
Returned values are:
• ENABLED (if the factory recovery is enabled)
• DISABLED (if the factory recovery is disabled)
Example:
AT!FWD=FACTORYRECOVERY
ENABLED
OK
AT!FWD?GETAPPINFO
Query Legato application info
To query:
AT!FWD?GETAPPINFO,<LEGATO APP NAME>
Returned values are:
• <Legato app name>
• status
• running processes
• app.name
• app.md5
• app.version
• legato.version
Note: Returned values may be truncated. However, OK will still be returned.
Note: <Legato app name> is case sensitive. If the name does not match, the
command returns [not installed] and ERROR.
Example:
AT!FWD?GETAPPINFO,columbiaAtService
columbiaAtService
status: running
running processes:
columbiaAtService[565] (565)
sh[1060] (1060)
/legato/systems/current/bin/app[1061] (1061)
app.name: columbiaAtService
OK
Table C-2: FX30 AT Commands
Command Description