GB
│
IE
│
7 ■
SWEW 750 C4
Placement of the removable plates
1) Open the waffle iron by releasing the lid locking device 0 and lifting the lid.
2) Upper removable plate: First slide the lower latches 8 into the lower mount-
ings 3.
3) Now press the upper latches 7 onto the locking devices 1, so that the
upper latches 7 spring under the locking devices 1 and the removable
plate is firmly seated.
4) Lower removable plate: First slide the rear latches 8 into the rear mountings 6.
5) Now press the front latches 9 onto the locking devices 5 so that the
latches 9 spring under the locking devices 5 and the removable plate is
firmly seated.
6) Press firmly once in the centre of the lower removable plate to ensure that it
is securely inserted.
Extracting the removable plate
1) Upper removable plate: Slide the locking devices 1 upwards and simultane-
ously tilt the removable plate forward. Lift the removable plate out from the
lower mountings 3.
2) Lower removable plate: Pull the locking devices 5 to the front. The removable
plate springs out a little so that you can pull it out from the rear mountings 6.
Commissioning
Carry out the following procedure with each of the 3 pairs of removable plates.
1) Smear the non-stick coating on the removable plates with oil suitable for cooking.
WARNING! RISK OF INJURY!
► Let the appliance cool down before exchanging the removable plates!
Risk of Burns!
2) Install a pair of removable plates into the appliance.
3) Insert the plug into a mains power socket.
4) Close the appliance and lock it with the lid locking device 0.
5) Let the appliance heat up for about 10 minutes.
NOTICE
► With the first usage a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Provide for
sufficient ventilation. For example, open a window.
To Next Page
Loading...
Need help?
General
