Simplex 4100ES Installation & Maintenance

v
This manual applies to product with the following:
Model number : 4100ES
Firmware revision : 1.02.04 and on
Document Name : LT0350 4100ES Installation & Maintenance Manual
Issue : 1.5 25 Feb, 2015
14 May, 2004 Issue 1.0.6 Original based on 574-848 Rev G
16 June, 2005 Issue 1.0.7 Added Tyco 614 detectors to Appendix F
30 Oct, 2005 Issue 1.0.8 Added System Sensor detector 885WP-B to List of
Approved Devices in Appendix F.
6 October
2006
Issue 1.0.9 References to LT0432 and 1976-181 Wiring Diagrams
added.
30 Nov. 2006 Issue 1.0.10 Updated drawings 1976-181 Sheets 102, 203, 500.
23 Jan. 2007 Issue 1.0.11 Clarification to RUI cabling limits (Chapter 3),
Checking wiring (Appendix C), T-GEN connection.
9 Aug. 2012 Issue 1.2 Changes for 4100ES introduction.
3-Oct-13 Issue 1.3 Changes for InfoAlarm display introduction
29-Jan-15
25-Feb-15
Issue 1.4
Issue 1.5
Battery charger adjustment updated.
Updated drawing 1976-174 sheet 1.
Model Number & Firmware Revision
Document
Amendment Log

Simplex 4100ES Specifications

General

Type	Fire Alarm Control Panel
Display	LCD
Battery Backup	Yes
Model	4100ES
Manufacturer	Simplex
Communication Protocol	Optional Ethernet
Signaling Line Circuits (SLCs)	Up to 10
Notification Appliance Circuits (NACs)	Up to 10
Agency Listings	UL, FM, CSFM, MEA
Max Relay Circuits	20
Communication Ports	Ethernet
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity	Up to 93% RH, non-condensing