Simplex 4100ES Installation & Maintenance

3-1
MINIPLEX transponder interface cards (TICs) allow for data and power interconnections
between the 4100ES host panel and remote locations. This chapter describes the
transponder installation for 4100ES MINIPLEX/RTU systems.
{xe "MINIPLEX 4100 Fire Alarm System: transponder interface card (TIC)"}{xe
"transponder interface card (TIC)"}
Refer to the page number listed in this table for information on a specific topic.
Topic See Page #
Introduction to MINIPLEX Transponders (4100ES) 3-2
MINIPLEX System Guidelines (4100ES) 3-4
Configuring Cards (4100ES) 3-5
TIC/Riser Mounting (4100ES) 3-6
TIC/Motherboard Interconnections (4100ES) 3-7
RUI Wiring (4100ES) 3-8
Chapter 3
Installing 4100ES MINIPLEX/RTU Components
Introduction
In this Chapter

Simplex 4100ES Specifications

General

Type	Fire Alarm Control Panel
Display	LCD
Battery Backup	Yes
Model	4100ES
Manufacturer	Simplex
Communication Protocol	Optional Ethernet
Signaling Line Circuits (SLCs)	Up to 10
Notification Appliance Circuits (NACs)	Up to 10
Agency Listings	UL, FM, CSFM, MEA
Max Relay Circuits	20
Communication Ports	Ethernet
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity	Up to 93% RH, non-condensing