Simrad GC80/85 Compact MK2 Gyro Compass
988-12718-003 60
2 If the tilt angle is incorrect, weight disks must be adjusted by
moving weights from one side to the other. After adjustments, wait
for 2 minutes for the oil to set before the tilt angle verification is
repeated.
Caution
The Sensitive element must have equal number of weight disks on
both weight points on the tilting side (north and south sides)!
3 Carefully rotate the Horizontal ring at least 1 complete rotation.
Verify that all movable parts will turn around without making any
contact with mechanical or electrical components.
4 Lift the lid from the damper oil case, and fill the container with the
supplied damper oil. The oil has high viscosity, and care should be
exercised when pouring the damper oil into the container to avoid
spill. Reinstall the lid on the damper oil case.
Any oil spilled on the outside should be cleaned.
To Next Page
Loading...
