Starting and stopping the trial maneuver
You can start the trial maneuver from the menu when the final speed or final course is
defined.
You can at any time stop the trial maneuver. The function will automatically stop when the
delay time has expired.
Manually changing the trial maneuver settings
The default trial maneuver settings are defined during commissioning of the vessel.
The trial maneuver settings menu remains open after the function is started. If a maneuver is
considered dangerous, you can adjust the speed and/or course to see how to avoid a
dangerous situation.
Trial maneuver | R5000 Operator manual
57
To Next Page
Loading...
Need help?
General
