(20) Read only
There has been an attempt
to
wnte data
to
a shared
file.
•
(21)
Bad line
A SuperBASIC syntax error has occurred.
(22) PROC/FN cleared
This
is
a message which
is
for information only and
is
not reporting
an
errOr
It
is
reporting
that
the program has been stopped and subsequently changed forcing
SuperBASIC
to
reset
Its
internal
state
to
the outer program
level
and so losing any
procedure environment which may have been
in
effect.
error recovery After
an
error has occurred the program can
be
restarted
at
the next statement by typing
CONTI
NUE
If
the error condition can be corrected, without changing the program, the program
can
be
restarted
at
the statement which triggered the error
Type
RETRY
•
20
FOR SERVICE MANUALS
CONTACT:
MAURITRON
TECHNICAL
SERVICE~
www.mauritron.co.uk
TEL:
01844
.
351694
FAX:
01844
-
352554
12/84
•
•
To Next Page
Loading...
