The Fusing heater is turned on right after main power switch is turned on.
When there’s no output signal on main motor operation at 100˚C, 160˚C READY status is maintained.
When output signal is sent, the Fusing temperature maintains 180˚C and settles to paper.
(180˚C is default value for Plain papers)
Fusing temperature is configured differently for each paper, but the Fusing temperature can be changed
within a certain range when the user desires.
When Fusing Roller’s temperature rises higher than 230˚C, CPU isolates Fusing Lamp’s power and
indicates an error at same time.
To Next Page
Loading...
