User’s Manual Page ii
SafetyInformation
ReadthefollowingprecautionsbeforesettingupaSINTRONESProduct.
Electricalsafety
Topreventelectricalshockhazard,disconnectthepowercablefromtheelectrical
outletbeforerelocatingthesystem.
When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged
before the signal cables are connected. If
possible, disconnect all power cables from the existing system before you add a
device.
Beforeconnectingorremovingsignalcablesfromthemotherboard,ensurethatall
powercablesareunplugged.
Seek professional assistance before using an adapter or e xtension cord. These
devicescouldinterruptthegroundingcircuit.
Makesurethatyourpowersupplyissettothecorrectvoltageinyourarea.Ifyou
arenotsureaboutthevoltageoftheelectricaloutletyouare using,contactyour
localpowercompany.
If the power supply is broken, do not
try to fix it by yourself. Contact a qualified
servicetechnicianoryourretailer.
Operationsafety
Before installing the motherboard and adding devices on it, carefully read all the
manualsthatcamewiththepackage.
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
To avoid short circuits, keep paper clips, screws, and staples away from
connectors,slots,socketsandcircuitry.
Avoiddust,humidity,andtemperatureextremes.Donotplacetheproductinany
areawhereitmaybecome
wet.
Placetheproductonastablesurface.
If you encounter technical problems with the product, contact a qualified service
technicianoryourretailer.
To Next Page
Loading...