Sirona Intego Pro - Setting the Speed on the Easypad

64 57 498 D3543
100 D3543.201.01.05.02 08.2016
4Operation Sirona Dental Systems GmbH
4.5Dentist element Operating Instructions INTEGO
4.5.8.2
Setting the speed on the EasyPad
Speeds are stored on the favorite keys 1, 2, and 3 that can be accessed
by pressing them. Individual speeds can be saved for each user profile on
the favorite keys.
On the C
+
electronic foot switch, spray activation is saved on the favorite
keys. The settings can also be made via the 4-way switch plate.
Accessing saved speed
✔ The electric motor is removed from the holder.
✔ The set speed is shown on the EasyPad display.
➢ Press one of the favorite keys briefly (<1 s).
 The speed saved on the favorite key is shown in rpm (revolutions
per minute) on the EasyPad display.
By moving the 4-way switch plate of the C
+
electronic foot switch to the
right, the settings of the favorite keys can be accessed consecutively.
Changing the speed
➢ Press and hold the favorite key 1 or 3 (> 1 s).
 The speed is increased or reduced.
The speed can also be increased or reduced by moving the 4-way switch
plate of the C
+
electronic foot switch up or down.
Electric motor, increments with favorite keys
1
2
Setup
3
S
0
1
2
Setup
3
S
0
IMPORTANT
Increments
The size of the increments depends on the speed range setting.
From 100 to 1,000 rpm = 100 rpm increments (with eControl option)
From 1,000 to 2,000 rpm = 200 rpm increments
From 2,000 to 5,000 rpm = 500 rpm increments
From 5,000 to 10,000 rpm = 1,000 rpm increments
From 10,000 to 20,000 rpm = 2,000 rpm increments
From 20,000 to 40,000 rpm = 5,000 rpm increments
Please note that the speed of the burr depends on the selected straight
or contra-angle handpiece.