Sirona Intego Pro - Maintenance and Repair Procedures

64 57 498 D3543
D3543.201.01.05.02 08.2016
17
Sirona Dental Systems GmbH 2Safety instructions
Operating Instructions INTEGO 2.7Maintenance and repair
båÖäáëÜ
thus also complies with W270 and KTW (Guideline on the use of plastics
in contact with drinking water). It can be connected directly to the public
drinking water system.
The INTEGO treatment center, provided it is equipped with a fresh water
bottle not connected to the public drinking water supply, also complies
with the requirements of EN 1717 and the DVGW German Gas and Water
Association).
In both cases, the treatment center has the "DVGW" label next to the
rating plate.
Treatment center not isolated from the public drinking water supply
If compliance with EN 1717 is required in the country, the respective
measures for the protection of public drinking water must be taken
outside the treatment center.
This applies to the following unit versions:
● INTEGO prowithout disinfection system
● INTEGO without fresh water bottle
● INTEGO with a fresh water bottle connected to the public drinking
water supply.
The treatment center then does not have the "DVGW" label.
Please comply with the national requirements with regard to connecting
treatment centers to the public drinking water system.
2.7
Maintenance and repair
Authorized technical personnel and
spare parts
As manufacturers of dental medical units and in the interest of the
operational safety of your system, we stress the importance of having
maintenance and repair of this unit performed only by ourselves or by
agencies expressly authorized by us. Furthermore, faulty components
must always be replaced with original spare parts.
Certificate, with modification note
We suggest that you request a certificate showing the nature and extent
of the work performed from those who carry out such work; it must contain
any changes in rated parameters or working ranges (if applicable), as well
as the date, the name of the company and a signature.
Maintenance intervals Despite the outstanding quality of your treatment center and regular care
by the practice team, in the interest of operational safety, it is essential to
have preventive maintenance performed at scheduled intervals.
In order to ensure the operational safety and reliability of your treatment
center and to avoid damage due to natural wear, as the system owner you
must have your system checked regularly by an authorized service
technician from your dental depot. Furthermore, safety checks must be
performed. Please contact your dental depot to obtain a maintenance
offer. For more information, please refer to "Maintenance by the service
engineer" [ → 292].