Sirona Intego Pro - Malfunctions and Error Messages; Messages on the EasyPad Display

64 57 498 D3543
294 D3543.201.01.05.02 08.2016
7Malfunctions Sirona Dental Systems GmbH
7.1Messages on the EasyPad Operating Instructions INTEGO
7
Malfunctions
7.1
Messages on the EasyPad
Errors on the EasyPad display
Messages are shown on the EasyPad display, such as:
Safety switch triggered [ → 70]
Days until next sanitation [ → 268]
Days until next maintenance date [ → 292]
Change amalgam separator [ → 255]
Refill disinfectant [ → 252]
Refill water for stand-alone water supply [ → 154]
Refill cleaning agent for chemical suction hose cleaning [ → 237]
Error messages with error code [ → 296]
Time of error message
The messages will be displayed after the treatment center is switched on.
If an error occurs during treatment, it will be displayed after the
instruments are put in the holder.
Only single messages can be displayed on the EasyPad. If there is more
than one message, a dot at the end of the EasyPad display will light up or
flash when the instruments are put in the holder.
Acknowledging messages
The flashing dot means that not all messages have been acknowledged
by the user. If the dot remains lit, all messages have been acknowledged,
but the errors have not been eliminated.
✔ All instruments are in place.
✔ A dot lights up or flashes at the end of the EasyPad display.
/