Sirona Intego Pro - Page 56

64 57 498 D3543
56 D3543.201.01.05.02 08.2016
3Unit description Sirona Dental Systems GmbH
3.11Water unit Operating Instructions INTEGO
Ambidextrous water unit with INTEGO
With the INTEGO, the Ambidextrous water unit is available only without a
disinfection system. However, it can be equipped with a fresh water bottle
for stand-alone water supply. Switching between the fresh water bottle
and public drinking water supply is another equipment option. Please
note the information given in the chapters "Media quality" [ → 16] and
"Standards/approvals" [ → 23].
The function for sanitizing the treatment center and flushing the water
lines (Purge) is optional. A fresh water bottle is needed to sanitize the
treatment center.
Automatic cleaning of the suction system is optional. An intake for a
suction hose for automatic cleaning is integrated into the water unit.
Water is pumped into a container behind the suction hose intake and
suctioned off from there, see "Suction hose cleaning on the Turn water
unit" [ → 239]
Ambidextrous water unit with INTEGO pro
With INTEGO pro, the Ambidextrous water unit can be optionally
equipped with a disinfection system. It automatically adds a disinfectant
to the water that comes in contact with patients. This reduces the amount
of bacteria in the water lines. If you operate the treatment center without
the disinfection system, please refer to the information in chapters "Media
quality" [ → 16] and Standards/Approvals" [ → 23].
Water lines, microorganisms, optional disinfection system
If the water unit is equipped with a disinfection system, it can be switched
to operation with a stand-alone water supply. After switching, distilled
water must be mixed with DENTOSEPT P disinfectant in a 100:1 ratio (1
liter of water, 10 ml DENTOSEPT P) and filled into the storage tank of the
water unit, see "Stand-alone water supply" [ → 154].
The top cover of the water unit has integrated cleaning adapters for
water-conducting instruments and a suction hose. The dentist element
and assistant element instruments can be inserted on both sides of the
water unit using these adapters. The openings are covered with flaps.
The adapters are needed for sanitizing the treatment center,
automatically purging the water lines (autopurge), and cleaning the
suction hoses.
To clean the suction system, water is pumped into a tank behind the
suction hose intake and suctioned off from there. A cleaning agent is
automatically added to the water if the dental treatment center is
equipped with the chemical suction hose cleaning option. For more
information, see"Suction hose cleaning on the Turn water unit" [ → 239].
WARNING
Microorganisms can multiply in the water.
These microorganisms could increase the risk of damage to one's
health.
➢ If the treatment center is equipped with a disinfection system, never
operate this without disinfectant.