SKF CMSS 60 - Page 48

Some of the outstanding advantages of an Annual Service
Agreement are:
Regularly scheduled maintenance and calibration.•
Reduced labor rates–approximately 20% saving over •
unscheduled field service.
Quick response on emergency service–normally within •
48 hours.
Facilitates maintenance budgeting.•
Minimizes paperwork–one purchase order covers the •
entire year.
On-site service of instruments or entire systems–reduces •
downtime, eliminates problems related to individual
instruments to the calibration laboratory.
Field service
Field Service is available to assist you with stubborn
maintenance problems, installations, and other technical
problems. If field service is required, contact SKF Condition
Monitoring.
Replacement parts
In most cases, emergency orders for parts, printed circuit
boards, subassemblies, and supplies can be filled within
24 hours. Ordering parts from SKF Condition Monitoring
provides you with a single source of supply and assurance
of part compatibility.
When ordering parts from SKF Condition Monitoring,
please provide a description, part number, model number,
and serial number.
SKF Condition Monitoring, Inc.
Service information
SKF Condition Monitoring, Inc. has sales and service offices
around the world. In addition, an international network of
sales representatives is available to assist you anywhere in
the world.
Product support programs
Customer support
At SKF Condition Monitoring, we are committed to
supporting the products we sell. This philosophy is
demonstrated through a world-wide sales and service
organization which provides a variety of services to our
customers.
Warranty service
Each SKF Condition Monitoring manufactured product
is tested and inspected to conform to its published
specifications and to be free of defects in materials and
workmanship. SKF Condition Monitoring will repair
or replace products which prove to be defective within
the warranty period. Detailed warranty information is
included in the applicable product instruction manual.
For more information, contact SKF Condition Monitoring
headquarters.
Annual service agreement
An annual service agreement is an economical and effective
way to assure continued high product performance.
Periodic scheduled maintenance and calibration is the best
insurance against equipment failure. It is a cost-effective
means of preventing expensive production interruptions
or delays in development programs. You are assured
of timely, competent service without the expense of
maintaining in-house maintenance capability, specialized
test equipment, and replacement parts inventories.
For additional information on SKF Reliability Systems products, contact:
SKF Reliability Systems
5271ViewridgeCourt•SanDiego,California92123USA
Telephone:+1858-496-3400•FAX:+1858-496-3531
Customer Service Telephone: +1 800-523-7514
Web Site: www.skf.com/cm
® SKF is a registered trademark of the SKF Group
All other trademarks are the property of their respective owners.
© SKF 2008
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior
written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this
publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the
use of the information contained herein. SKF reserves the right to alter any part of this publication without prior notice.
SKFPatentsinclude:#US04768380•#US05679900•#US05845230•#US05854553•#US05992237•
#US06006164•#US06199422•#US06202491•#US06275781•#US06489884•#US06513386•
#US06633822•#US6,789,025•#US6,792,360•US5,633,811•US5,870,699•#WO_03_048714A1
Publication CMSS 31075800 (October 2008)