SKF Reliability Systems
Limited Warranty
WARRANTY
Subject to the terms and conditions contained herein,
SKF warrants to the Buyer that for the warranty period
indicated below the products sold by SKF that are listed
below (the “Products”), when properly installed, maintained
and operated, will be free from defects in material and
workmanship and shall be fit for the ordinary purposes for
which the Products are designed.
BUYER’S LIMITED REMEDIES
This limited warranty defines SKF’s sole and exclusive
liability and Buyer’s sole and exclusive remedy for any claim
arising out of, or related to, any alleged deficiency in any
Product sold by SKF, even if such claim is based on tort
(including negligence or strict liability), breach of contract,
or any other legal theory.
If the Product does not conform to this limited warranty,
Buyer must notify SKF or SKF’s authorized service
representative within thirty (30) days of discovery of the
nonconformity; provided, however, that SKF shall not be
liable for any claim for which notice is received by SKF
more than thirty (30) days following the expiration of the
applicable warranty period for the Product. Upon receipt of
timely notification from Buyer, SKF may, at its sole option,
modify, repair, replace the Product, or reimburse Buyer for
any payment made by Buyer to SKF for the purchase price
of the Product, with such reimbursement being pro rated
over the warranty period.
WARRANTY PERIOD
Except as expressly provided below, the warranty period for
each Product shall commence on the date the Product is
shipped by SKF to Buyer.
90-DAY WARRANTY
Products warranted for ninety (90) days by SKF are
as follows: cable assemblies, MARLIN QuickConnect
(MQC), magnetic temperature probes, and all refurbished
equipment.
Limited Warranty
v
ONE-YEAR WARRANTY
Products warranted for one (1) year by SKF are as follows:
all Microlog products and accessories, all MARLIN data
managers (MDM), all MARLIN Condition Detectors (MCD),
all Wireless Machine Condition Detectors (WMCD), all
Multilog Condition Monitoring Units (CMU, TMU), Multilog
Local Monitoring Units (LMU), all Wireless Monitoring
Systems V/T, all Vibration Pen
Plus
, all transmitters, all SKF
software, all Monitor Interface Modules (MIM), all Machine
Condition Transmitters (MCT), MicroVibe P and Custom
Products with the prefix of CMCP (with the exception of any
consumable or expendable items).
TWO-YEAR WARRANTY
Products warranted for two (2) years by SKF are as follows:
all standard Eddy Probes, Eddy Probe Drivers, and Eddy
Probe Extension Cables, Multilog On-line Monitoring
system (DMx), and all M800A and VM600 Machinery
Monitoring Systems.
For all On-line Systems that have satisfied Criteria 1 and
2 below, the warranty period shall be either thirty (30)
months from the date the On-line System is shipped by
SKF to Buyer, two (2) years from the date the On-line
System is installed and commissioned by SKF, or two (2)
years from the date on which the installation of the On-
Line System has been audited and commissioned by SKF
or its authorized service representative, whichever period
ends first.
Criteria 1. Devices used with a Multilog Condition
Monitoring Unit (CMU), Multilog Local
Monitoring Unit (LMU), including, but not
limited to, the sensing device, the interconnect
cabling, junction boxes, if any, and the
communications interface, must consist only of
SKF-supplied or SKF-approved devices and/or
components. The computer provided by Buyer
must meet the requirements stipulated by SKF.
To Next Page
Loading...
