EN
6. Installation
6
- 57 -
951-171-049
Version 02
6.6 Fixation of the metering device at the
place of installation
It is recommended to provide a free space of
about 80 mm around the metering device
for inspection and connection purposes. The
described metering devices are fixed to 2 or
4 mounting bores.
For measures see table Size, dimensions and
weights of the respective metering device.
Proceeding
Position the metering device to be mounted
at the place of installation. Transfer the drill
pattern and then make the corresponding
bores.
Tightening torques, see corresponding table
in these instructions
Fig. 23 Fixation of the metering device at the place of installation
6
4
21
3
5
MADE IN XXXXXXX
XXXXXXX
SSV
LINCOLN
To Next Page
Loading...
Need help?
General
