EN
13. Shutdown and disposal
13
12
- 65 -
951-171-049
Version 02
13. Shutdown and disposal
13.1 Temporary shutdown
Temporarily shut the system down by:
○ Switching off the superior machine
13.2 Final shutdown and disassembly
The final shutdown and disassembly of the
product must be planned and carried out
by the operator in a professional manner
and in compliance with all regulations to be
observed.
13.3 Disposal
Countries within the European Union
Disposal should be avoided or minimized
wherever possible. Disposal of products con-
taminated with lubricant must be effected
via licensed waste disposal contractor in ac-
cordance with environmental requirements
and waste disposal regulations as well as
local authority requirements
.
The specific classification of the
waste is in the waste producer's
responsibility, as the European
Waste Catalogue provides differ-
ent waste disposal codes for the
same type of waste but of differ-
ent origin.
Electrical components
have to be disposed of or recycled follow-
ing WEEE directive 2012/19/EU.
Plastic or metal parts
can be disposed of with the commercial
waste.
Countries outside the European Union
The disposal has to be done according to the
valid national regulations and laws of the
country where the product is used.
To Next Page
Loading...
Need help?
General
