EN
9. Cleaning
9. Cleaning
9.1 Cleaning agents
Cleaning agents compatible with the ma-
terial may be used only. (Materials, see
chapter 2.3).
Thoroughly remove residues of
cleaning agents from the product
and rinse off with clear water.
Electric shock
Carry out cleaning works only on depressurized products that have been disconnected from the power supply. Do not touch cables or
electrical components with wet or damp hands.
Performance of cleaning, required personal protective equipment, cleaning agents and devices following the valid operational regu-
9.2 Exterior cleaning
• Mark and secure wet areas
• Keep unauthorized persons away
• Thorough cleaning of all outer surfaces
with a damp cloth
9.3 Interior cleaning
Normally, interior cleaning is not required.
Should incorrect or contaminated lubricant
have been filled, inside cleaning of the prod-
uct will be required.
To do so, contact the SKF Customer Service.
- 60 -
951-171-049
Version 02
To Next Page
Loading...
Need help?
General
