82
SJ6826 RT, SJ6832 RT
221587ABA
Section 6 – Technical Specifications Floor loading pressure
7.6 Floor loading pressure
Models
Weights Pressures
MEWP
Weight
Max weight per
wheel/outrigger
pad
LCP** OFL**
kg lb kg lb kPa psi kg/m
2
psf
SJ6826 RT on tires
(foam-filled only)
Min* 2930 6460 1400 3090 1130 163 620 125
Max* 3440 7570 1630 3600 1310 190 730 150
SJ6826 RT on
outrigger pads
Min* 3436 7573 1400 3090 280 40 590 119
Max* 4003 8823 1630 3600 320 46 680 138
SJ6832 RT on tires
(foam-filled only)
Min* 3443 7590 1675 3693 1350 195 720 146
Max* 3897 8589 1860 4100 1500 216 920 166
SJ6832 RT on
outrigger pads
Min* 3553 8027 1675 3693 330 47 620 126
Max* 4095 9027 1860 4100 370 52 700 142
Min: Minimum MEWP weight (Unloaded platform, no options/attachments)
Max: Maximum MEWP weight (Platform loaded to capacity with options/attachments)
Wheel is the weight that can be experienced on one wheel.
Note: This is more than 25% of the machine weight due to possible weight distribution over the machine and platform.
LCP: Local Concentrated Pressure is a measure of how hard the MEWP presses on the area in direct contact with the floor/tire.
OFL: Overall Floor Load (Pressure) is a measure of the average load the MEWP imparts on the whole surface directly underneath the
chassis. This has been calculated by dividing the MEWP weight by the overall floor area occupied by the MEWP (on wheels).
Note: The floor covering (e.g., tile, carpet, etc.) or the structure (e.g., beams) of the operating surface must
be able to withstand more than the values indicated above.
1852AA
NOTE
The LCP or OFL that an individual surface can withstand varies from structure to structure and is
generally determined by the engineer or architect for that particular structure.
WARNING
Do not use tires other than the tires that Skyjack
specifies for this MEWP. Do not mix different types
of tires or use tires that are not in good condition.
Only replace the tires with the same types that are
approved by Skyjack. The use of other tires can
make the MEWP less stable. If you do not obey,
there is a risk of death or serious injury.
To Next Page
Loading...
Need help?
General
