SMA sunny home manager - Page 55

Procedure:
1. Select the field I am already registered in SunnyPortal.
2. Enter the e-mail address and the SunnyPortal password in the fields SunnyPortal e-mail
address and Password.
3. Select [Next].
☑ The page Select PV system opens.
Creating a SunnyHomeManager System in SunnyPortal
All devices with an identical password and NetID form a system. For this reason, a password used
for all devices in a system is called a system password. The system password is the same as the
device password for the user group Installer.
Requirements:
☐ The BLUETOOTH LED on the inverter or BLUETOOTHPiggy‑Back must be glowing blue.
☐ Either a uniform user-defined system password or the factory-set standard password 1111
must be set on all BLUETOOTH and Speedwire devices for the user group Installer. If
necessary, set a uniform system password for all BLUETOOTH and Speedwire devices (see
SunnyExplorer Help).
Procedure:
1. Activate the field Create a new PV system and enter a system name (e.g. My
SunnyHomeManager system).
2. In the window for entering the system password, enter the system password of the user role
Installer:
• If the standard password 1111 is still set on all devices for the user group Installer,
enter a new system password.
• If a different uniform password has already been set on all devices, enter this password
as the system password.
• If a uniform password has not been set on all devices, set a uniform password for the
user group Installer using the SunnyExplorer software (see SunnyExplorer help) and
enter this password in the PV System Setup Assistant as the system password.
3. Enter the system password again in the field Repeat password.
4. Select [Next].
☑ The page Select devices opens.
5. Enter the serial number of the SunnyHomeManager in the field PIC. Enter the registration ID
of the SunnyHomeManager in the field RID.
8 Commissioning
SMA Solar Technology AG
Installation Manual 55HoMan-IA-en-20